Bachelor of Technology

Senior engineer

v  FEED& Detailed Engineering of Offshore platforms and Onshore Oil & Gas plantsin both brownand green field projects.

• Preparation / Review of FEED documents such as specification, datasheets, SLD, Layout, technical Reports etc.
• Conduct Offshore & Onshore site visits, Data collection and prepare site survey reports
• Design / Re-affirm the Sizing & Selection of various Electrical equipment like HV & LV Switchgear, LV transformers, HV & LV cable, Motors, AC /DC UPS system, Power management system (PMS) etc.
• Modification / replacement / retrofit of existing MV / LV switchgear
• Preparation of project scope of work, Design Basis memorandum, Enquiry specifications data sheets, MR and TBE
• Preparation of SLD, Protection SLD, Power & control philosophy / schematic drawings, Equipment layout drawings, cabling layout, Earthing layout, lighting layout etc
• Responsible to identify the team and plan the design activities to achieve the schedule
• Performing power system studies using ETAP 18
• Engineering co-ordination with other internal departments like HSE, Mechanical, Civil and C&I and reviewing the interdepartmental document / drawings / package
• Support project management team to prepare EPIC scope of work, EPIC schedule, cost estimates & technical dossiers and support management in key decisions making.
• Project planning and scheduling, Resource Planning, Schedule monitoring, Risk assessment, Client interface and coordination with EPIC contactors and outside parties
• Provide guidance to EPIC Contractor / Sub Contactors / Vendor and resolve the issues.
• Participation in Safety Studies HAZID & ENVID and Constructability studies
• Mentoring the engineers and designers to project requirements

v  Projectsexecuted.

• Acting Lead Engineer for A location offshore platform activities for FEED-DBN PWM A&B locations Produced Water Management (NOC CFT No.10052768), North oil company (NOC), Al-Shaheen field, Qatar
• Lead Engineer for FEED for Power Feeder Circuits from Kahramaa New 132/11 kV Substation to Existing HV Switchboard of QP refinery Substations & MIC Substation at QP refinery Mesaieed, Qatar Petroleum
• Project Manager and Lead Engineer for Replacement of Existing AC UPS and DC UPS in various locations in QATARGAS. (EPIC Contractor: Petrotec & Petrocon)
• Project Manager and Lead Engineer for Detailed Engineering Services for STG AVR Obsolescence Replacement, EPMS obsolescence Replacement & Kahramaa Incomer Bay Control, Protection, & Telecom Obsolescence - ORYX GTL. (Contractor: QCON)
• Lead Engineer for Detailed Design and Engineering for EPIC for New HVAC system in QATARGAS-1 Upstream Telecom room and Non plant buildings of Warehouse & Workshop, QATARGAS. (Contractor: TRAGS & MEDGULF)
• Lead Engineer for Detailed Engineering for Upgrade of Velocity Approach System & Docking and mooring system in Berth 1, Berth 22 & 23, Berth 3,4 & 5, QATARGAS. (Contractor: DESCON and MEDGULF)
• Senior engineer for FEED in Al Shaheen Field Development (Phase 2, Batch 1) – Well head platforms and bridges, NOC

Senior engineer

DetailedEngineering & Modification of 33kV & 11kV Substations and Electricalsystems for Oil & Gas Plants(NGL plant)

• Review of FEED documents such as specification, datasheets, Layout, reports etc.
• Design and reaffirm the Sizing & Selection of various Electrical equipment like Transformers, STATCOM, 132kV Cable, Capacitor bank, HV & LV Switchgear, LV transformers, MV & LV cable, PMS/ SCS, Bus duct, DC &  AC UPS system etc
• Prepare the RTQ (Request for technical query) in case of conflicting requirement amongst any of the specification, standard, datasheets, drawings, studies & reports
• 33kV GIS and 11kV AIS HV Substation design
• Reactive power Compensation design of 33kV & 11kV capacitor banks and STATCOM
• Modification / replacement / retrofit of existing HV switchgear
• Preparation of project scope of work, Design Basis memorandum, Enquiry specifications data sheets, power system studies scope of work and EHAZOP scope of work
• Technical Bid Evaluation of various electrical equipment
• Preparation of SLD, Protection SLD, Power & control philosophy / schematic drawings, Electrical Equipment layout drawings, Cabling routing layout, Cabling tray layout, Cable transit details, Earthing layout, Lightning protection layout  Lighting layout  etc
• Responsible to attend kick off meeting, study contract specification and prepare the project engineering deliverables and schedule in coordination with project manager
• Prepare engineering document deliverable register (EDDR) and three-week plan look head schedules
• Ensuring that the vendor information incorporated in engineering deliverables
• Prepare the site survey reports and finalizing the location of capacitor building, substation building, STATCOM building, Power transformers & cable routing / cable trenches / channels
• Responsible to identify the team and plan the design activities to achieve the schedule.
• Instruct / Guide the Engineers and Draftsmen / Designer to achieve the task
• Responsible to ensure timely availability of approved drawings, specifications to start the activities as per schedule
• Coordinating and reviewing the power system studies with PSS consultant
• Engineering co-ordination with other internal departments like Mechanical, Civil and C&I and reviewing the interdepartmental document / drawings / package.
• Coordinate with various equipment vendors and client
• Inspection (FAT) of electrical equipment like HV switchgear, LV switchgear, transformers etc
• Experience of participation in safety studies like eHAZOP (SAFOP)
• Assisting and guiding the Site Construction team and Commissioning team

v  Projectsexecuted.

• Acting Lead engineer for Engineering (EPIC) of Gas processing plants under the project code name “POWER GENERATION RETIREMENT PROJECT”forHabshan & BAB gas plants (NGL) of GASCO (Abudhabi Gas industries limited)

Senior Engineer

v  Basicengineering, FEED, Detailed Engineering and Vendor Engineering Review of Coal based thermal power plants Gas based combinedcycle power Plants (CCPP) and Petrochemical plants

• Preparation of Detailed Project Report, Due Diligence report, Design Basis Report etc.
• Sizing of Electrical equipment like Generator Transformer, Unit Auxiliary transformer (UAT), Station transformer, IPBD, Generator Circuit breaker, Emergency DG Set, LV transformers, HT & LT SWGR, NSPBD, UPS, HT & LT cable, DC system etc
• Preparation of Enquiry specifications documents for total EPC Contract
• Evaluation of Technical and commercial electrical equipment bid
• EHV & HV Switchyard / Substation design for Power evacuation
• Preparation of SLD, Power & control philosophy / schematic drawings, Electrical Equipment layout drawings, cabling layout etc. for power plants
• Power System studies using ETAP
• Power plant Earthing and lightning protection system design documents / drawings.
• Vendor Engineering document / drawing review for total EPC Contract, e-BOP package and Individual electrical & mechanical packages of power plants
• Inspection of electrical equipment like Generator transformer, UAT, EHV equipment etc.
• Engineering co-ordination with other internal departments like Mechanical, Civil and C&I and reviewing the interdepartmental document / drawings / package.
• Coordinate with various package vendors and client
• Instruct / Guide the junior Engineers and Draftsmen / Designer to achieve the task.
• Perform Resource planning and monitor resource utilization.

v  Electrical Leadengineer for 225MW Combined Cycle Power Plant (CCPP) SOMA, 1 x 300MWCoal based Thermal Power Plant (TPP) Maruti, 2 x 660MW super critical TPP TPCIL& 2 x 300MW Coal based TPP Jinbhuvish Power

v  Projectsexecuted.

• Detailed Engineering of 225 MW Combined Cycle Power Plant for SOMA enterprise at Kashipur, Uttaranchal
• Specification review, Bid evaluation & vendor document review of 2X 660MW Supercritical Thermal Power project at Krishnapatnam, Andhra Pradesh for TPCIL (Thermal Powertech Corporation India Limited)  Hyderabad
• Vendor Document review and approval of 1 x 300MW coal based TPP for Maruti Coal & power Ltd in Korba, Chhattisgarh
• Electrical Vendor Engineering Document review of 726.6 MW CCPP at Pallatana, Tripura  for OTPC (ONGC Tripura Power Company )

Assistant Engineer

Basicengineering and Detailed Engineering in Primary & Secondary PowerDistribution system for Industries and Substations

• HV and MV Power distribution system design
• Outdoor 66kV and 220 kV Switchyard designs
• Earthing and lightning protection system design
• Preparation of Key SLD, Power & control schematic drawings, electrical equipments layout drawings, cabling layout, Earthing & lightning protection layout
• Preparation of Design Basic report , Load lists, electrical equipment bid documents, Technical and commercial bid evaluation
• Sizing calculation for electrical equipment, Power & Control cables, earthing conductor and reactive compensation at different voltage levels

• Site coordination during installation and commissioning period

v  ProjectsAssisted

• Detailed Engineering of Electrical Systems for Cigarette manufacturing Division M/s ITC Ltd., Puna, India
• Detailed engineering of electrical systems for Automobile Plant #2 at Toyota Kirloskar Motor Bidadi, Bangalore

PMP